Siemens SIMATIC IPC677D Operating Instructions Manual page 167

Settings in the MEBx
1. Use the arrow keys to select "MEBx" and confirm with the <Enter> key.
2. Select "MEBx Login".
3. Enter the default password "admin".
Change the password. The new password must comprise:
– At least eight characters
– An upper case letter
– A lower case letter
– A number
– A special character (! @ # $ % ^ & *)
– The underscore "_" and space characters are valid in the string but do not increase
4. Switch to the "Intel (R) AMT Configuration" submenu and enable "Manageability Feature
Selection".
5. Switch to the "Intel(R) ME General Settings" submenu and enable access via the network
with "Activate Network Access".
6. Confirm the dialogs that appear with "Y".
Drivers are automatically installed once as required in the subsequent restart.
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
the complexity of the password.
Note
If the password is no longer available, you must reset the Intel® AMT to the default
settings, see Resetting the Intel® AMT to the default settings and disabling AMT
(Page 168).
Backup the password to protect it against loss.
Technical information
8.7 Active Management Technology (AMT)
167