Table of Contents
Advertisement
• Be sure of the following points when the
AF assist lamp is in use.
– Do not look in to the AF assist lamp
closely.
– Detach the lens hood.
– Do not cover the AF assist lamp with
your fingers.
– The battery may be consumed faster
than usual.
• In simple mode [
[AF ASSIST LAMP] is fixed to [ON].
• You cannot use the AF assist lamp in
[SCENERY], [NIGHT SCENERY],
[PANNING] and [FIREWORKS] in scene
mode (P62).
• When you do not want to use the AF
assist lamp (e.g. when you take a picture
of a subject in a dark place), set the [AF
ASSIST LAMP] to [OFF]. In this case, it
becomes difficult to focus on the subject.
• The AF area is set only to a point on the
centre of the screen when the AF assist
lamp is turned on.
• A vignetting effect may appear on the
circumference of the AF assist lamp
because the AF assist lamp may be
obscured by the lens, however, this does
not cause a problem with the performance
of the camera.
78
VQT0Q40
Recording Menu Settings
], the setting on the
Digital Zoom
It is possible to further magnify a subject
already magnified 12 times with the optical
zoom 4 more times with the digital zoom,
thereby reaching a maximum of 48 times.
∫ Entering the digital zoom range
When you rotate the zoom lever to the
extreme Tele position, the on-screen zoom
indication may momentarily pause. This is
not a malfunction.
You can enter the digital zoom range by
continuously rotating the zoom lever to Tele
or releasing the zoom lever once and then
rotate it to Tele again.
W
W
1 Optical zoom
2 Digital zoom
• When using the digital zoom, the picture
quality becomes deteriorated.
• In the digital zoom range, the stabilizer
function may not be effective.
• We recommend using a tripod.
• The indicated zoom magnification is an
approximation.
• The AF area is displayed with a size wider
than usual and set only to a point on the
centre of the screen in the digital zoom
range. (P75)
[D.ZOOM]
T
T
Advertisement
Table of Contents
