Table of Contents
Advertisement
MONITOR/VIEWFINDER
Adjust the brightness of the LCD monitor
(when pictures appear on the LCD monitor)
or Viewfinder (when pictures appear on the
Viewfinder) in 7 steps.
AUTO REVIEW
[OFF]:
The recorded picture does not
automatically appear.
[1SEC.]: The recorded picture
automatically appears on the
screen for about 1 second.
[3SEC.]: The recorded picture
automatically appears on the
screen for about 3 seconds.
[ZOOM]: The recorded picture
automatically appears on the
screen for about 1 second. Then
it is enlarged 4 times and appears
for about 1 second. This mode is
useful for confirming focus.
Pictures in burst mode, auto
bracket, pictures with audio are
not enlarged even if [ZOOM] is
selected.
Preparation
• In motion image mode [
function is not activated.
• When pictures are recorded in any speed
([
], [
(P47) or auto bracket [
auto review function is activated
regardless of the setting on the auto
review function. (The picture is not
enlarged.)
• When using pictures with audio, the auto
review function works while recording the
audio or the data into the card regardless
of the setting on the auto review function.
(The picture is not enlarged.)
• When the quality is set to [TIFF], the auto
review function works until the end of
recording onto the card. (The picture is
not enlarged.)
• The setting for the auto review function is
disabled in motion image mode, burst
mode, auto bracket or when [AUDIO
REC.] is set to [ON].
PLAY ON LCD
When Viewfinder is selected in the
recording mode while setting [PLAY ON
LCD] to [ON], the picture automatically
appears on the LCD monitor in review or
playback. (P27)
], auto review
] and [
]) on burst mode
] (P45), the
23
VQT0Q40
Advertisement
Table of Contents
