Table of Contents
Advertisement
∫ Programme AE
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
• Remove the lens cap.
1 1 Turn the camera on.
2 Set the mode dial to
programme AE mode [ ].
• The power indicator (green) lights.
When it blinks, the remaining battery
power is low. Insert a fully charged
battery.
2 Aim the AF area 1 to the point
you want to focus and then press
the shutter button halfway.
F2.8
• A: Press the shutter button halfway to
focus.
30
VQT0Q40
Recording pictures (basic)
OFF
ON
1/25
• The focus indication 2 is lit and then
the aperture value 3 and the shutter
speed 4 are displayed.
3 Take a picture.
F2.8
• B: Press the shutter button fully to take
the picture.
When the
subject is not
focused
Focus
Blink (green)
indication
AF area
Turns from
white to red
Sound
Beeps 4 times Beeps 2 times
1/25
When the
subject is
focused
On (green)
Turns from
white to green
Advertisement
Table of Contents
