Table of Contents
Advertisement
7 Operation
The fan and functions can be operated by the control panel on the front of the fan, or
by the supplied remote control.
Note: The modes "NAT" (Nature) and "SLEEP" can only be selected with the Remote
Control. They cannot be selected using the controller on the front of the fan.
7.1 Using the Fan
The Fan has a three speed selection being Low, Med and High.
•
Ensuring the Fan has been assembled correctly, plug into the power point and
switch on. The POWER indicator light will illuminate.
•
For Low Fan Speed, press the "ON/SPEED" button on the fan control panel or the
remote control once. The LOW light will illuminate as well as the "NOR" (Normal
Mode) Light and the fan will start to spin.
•
For Medium Fan Speed, press the "ON/SPEED" button again.
The MED light will illuminate as well as the "NOR" (Normal Mode) Light and the fan
will speed up.
•
For High Fan Speed, press the "ON/SPEED" button again.
The HIGH light will illuminate as well as the "NOR" (Normal Mode) Light and the fan
will speed up.
NOTE: Pressing the "ON/SPEED" button again will cycle the speed back to LOW,
and so on.
•
To turn the fan off, press button "OFF" Button.
Fan Control Panel
Remote Control
Page 15 of 20
Hide quick links:
Advertisement
Table of Contents
