Setting The Fan Head Angle; Remote Control - Homemaker MH-MF40A User Manual

40cm pedestal misting fan
Table of Contents

Advertisement

Fit the water tank / hose connector into the top of the water tank as shown

5 Setting the Fan Head Angle

The Fan Head can be adjusted Up and Down so as to blow
air at the required angle.
Turn off and unplug prior to adjusting.
To adjust, grasp the Fan Grills and tilt the head either forward
or backward to your desired angle.

6 Remote Control

The fan comes with a remote control for your convenience.
The remote control must be pointed towards the receiver, which is
located inside the display on the front of the fan control panel in order to
work.
Do not block the line of sight between the remote control and the
receiver.
Do not drop the remote control on the floor or bang it against hard objects.
To install the batteries, first slide the back battery cover off.
(Batteries not included)
Insert the batteries inside the battery compartment matching
polarity icons with those in the battery compartment and then refit
the cover.
Battery Type: "1.5V 2 x AAA"
Do not mix new and old batteries in the remote control.
To prevent corrosion, remove the batteries if the remote control will not be used
over a lengthy period.
(Batteries not included)
Page 14 of 20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents