Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Security Camera
  5. BL-C1
  6. Getting started

Panasonic BL-C1 Getting Started

Network camera
Hide thumbs Also See for BL-C1:
1
2
3
4

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual

Getting Started

Network Camera
BL-C1
Model No.
Trademarks
Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
•
Microsoft, Windows and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
•
•
Screen shots reprinted with permission from Microsoft Corporation.
•
All other trademarks identified herein are the property of their respective owners.
This software is based in part on the work of the Independent JPEG Group.
•
Abbreviations
•
UPnP is the abbreviation for "Universal Plug and Play".
"Network Camera" is called "Camera" in this manual.
•
•
"Setup CD-ROM" is called "CD-ROM" in this manual.
1.
Connect the camera to your router.
The PC should be connected to the router and then to the Internet in advance.
Router
(Customer-provided)
WAN
4
Internet
Modem
2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX14952ZA
KK0206YR0 (CE)
Indoor Use Only
3
2
1 LAN
Ethernet cable
(Straight Cat5 cable,
Customer-provided)
PC
(For setup and display)
(Customer-provided)
Please read the Important Information manual before using.
This Getting Started explains how to connect, set up and mount the
camera. See the Operating Instructions on the Setup CD-ROM for
details about the camera's features.
The Setup CD-ROM provides Getting Started in the following languages:
•
English, French, German, Italian, Spanish, Russian, Chinese and Korean.
If you cannot complete the setup, see the Troubleshooting manual on the
•
Setup CD-ROM.
Connect the Ethernet cable (customer-
provided) to the camera and the router.
Connect the AC adaptor cord to the DC In
jack.
Plug the AC adaptor into the power outlet.
•
Confirm that the indicator lights green after about
1 minute.
•
When you operate the camera, the power outlet
should be near the camera and easily accessible.
•
Use only specified Panasonic AC adaptor (Order
No.PQLV206CEY [for use in countries/areas other
than the United Kingdom], PQLV206EY [for use in
the United Kingdom]).
•
If the indicator does not light green, see page 3
and 4 of Troubleshooting on the CD-ROM.
•
The camera may become warm. This is not a
malfunction.
AC adaptor
The indicator
lights green.
To the power outlet

Advertisement

loading

Related Manuals for Panasonic BL-C1

Summary of Contents for Panasonic BL-C1

  • Page 1: Getting Started

    The camera may become warm. This is not a 1 LAN malfunction. Ethernet cable (Straight Cat5 cable, To the power outlet Customer-provided) Internet Modem (For setup and display) AC adaptor (Customer-provided) 2006 Panasonic Communications Co., Ltd. All Rights Reserved. PQQX14952ZA KK0206YR0 (CE)

  • Page 2: Set Up The Camera

    Set up the camera. Click [Automatic Setup (Local Access Only)]. Important • To avoid any possible problems, temporarily disable any firewall or antivirus software. • This procedure explains installation of the camera on the same network as your PC. • Before proceeding, close your web browser.
  • Page 3 Port Forwarding manually following the router's manual, and try Automatic Setup again. For more information about setting up a router, refer to the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ • If the message "Failed to register with Viewnetcam.com." is displayed, con- firm that the router is connected to the Internet.

  • Page 4: Mount The Camera

    Security Warning window on Microsoft Windows XP Service Pack 2 To view a video (Motion JPEG), ActiveX Controls must be installed. Follow the steps shown below to install ActiveX Controls. Click the warning displayed above the tabs, and click [Install Click [Install].