Table of Contents
Advertisement
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Picture
Snowy Picture
Multiple Image
Interference
Normal Picture
No Picture
No Colour
Scrambled
Coloured Patches
No Colour
Projection TV screen
Symptoms
After-images appear
Symptoms
Sound
Do not allow a still picture to be displayed for an extended period, as this can cause
a permanent after-image to remain on the Wide Projection TV screen.
Examples of still pictures include logos, video games, computer images, teletext and
images displayed in 4:3 mode.
Note:
The permanent after-image on the Wide Projection TV screen resulting from fixed
image use is not an operating defect and as such is not covered by the Warranty.
This product is not designed to display fixed images for extended periods of time.
Aerial Location, direction or Connections
Noisy Sound
Aerial Location, direction or Connections
Normal Sound
Electrical Appliances
Noisy Sound
Cars/Motorcycles
Fluorescent Lamps
Volume (Refer to page 12, 13)
(Check whether the mute function has
No Sound
been activated on the Remote Control.)
Not plugged into AC outlet
Not switched on
No Sound
Contrast and Brightness/Volume setting
(Check by pressing the Power Switch or
Stand-by Button on the Remote Control.)
Colour Control (Refer to page 26, 27)
Normal Sound
Colour System (Refer to page 24)
Normal or
Retune Channels (Refer to page 19)
Weak Sound
Magnetic interference from unshielded
equipment;
Normal Sound
TV set moved while "ON".
Turn the TV set off for 30 minutes, using
the "Power" Switch on the TV set.
Sound System (Refer to page 24)
Noisy Sound
Colour System (Refer to page 24)
Checks
Checks
39
Advertisement
Table of Contents
