Table of Contents
Advertisement
Connections
Connecting the Aerial Cable to the RF In Terminal
VHF Aerial
UHF Aerial
Mixer
75 Ohm
Coaxial Cable
RF In Terminal
Notes:
• To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating
plug are required.
• If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial
socket and your set.
• Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for
your particular area and accessories required.
• Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
Connecting Headphones
Connect headphones as follows.
Main
Sub.
Screen condition
Single picture/
Teletext
Picture in Picture
Picture and Picture
Main Headphones plug:
When a Main Headphones plug is inserted into the Headphones socket, all speakers will be automatically disconnected;
only the Main Headphones will function.
Use Volume Up "+" or Down "-" button to control volume level.
Sub Headphones plug:
For the sub Headphones volume control, refer to page 28.
S VIDEO
VIDEO L/MONO
R
AUDIO
(3.5mm Plug)
A
A
B
A
B
Coaxial Aerial Plug
AV3
IN
Speaker
Main
Sound
Headphones
A
A
(Stereo)
(Stereo)
A
A
(Stereo)
(Stereo)
A
A
(Stereo)
(Stereo)
Coaxial aerial plug
RF in
Terminal
75 Ohm Coaxial Cable
(Optional)
(not supplied)
You can listen to sound from each of the
headphones plugs as shown below.
Sub
Monitor
Output
Headphones
A
(Stereo)
(Mono)
B
(Stereo)
(Mono)
B
(Stereo)
(Mono)
A
A
A
9
Advertisement
Table of Contents
