shortrange or longrange command additionally, you can narrow the term of data to be exported (see
"shortrange
Subcommand" on page 148 or
From indicates the starting time for collecting monitoring data. To indicates the ending time for
collecting monitoring data.
Interval indicates the interval at which the monitoring data was collected (gathering interval). For
example, Interval 15min. indicates that monitoring data was collected at 15-minute intervals.
Storing periods output by the show command is the same as the information displayed in the Monitoring
Term area of the Auto LUN window (see
Figure 46 Information output by the show command
.
The login command must execute before the show command executes.
group Subcommand
Syntax
group
{PhyPG
PhyLDEV
PhyExG
PhyExLDEV
PhyProc
PhyCSW
PG
LDEV
Port
PortWWN
LU
PPCG
134
Using the Export Tool
[Short|Long]
[[parity-group-id]:[parity-group-id]][
[Short|Long]
[[parity-group-id]:[parity-group-id]][
[[exg-id]:[exg-id]][
[[exg-id]:[exg-id]][
[Short|Long]|
[Short|Long]|
[[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-
group-id]:
[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-
group-id]][
...]|
[[[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-
group-id]:
[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-
group-id]][
...]|
internal|virtual]|
[[port-name]:[port-name]][
[[port-name]:[port-name]][
[[port-name host-group-id]:[port-name host-group-id]][
[[XP Performance Control-group-name]:[XP Performance Control-group-name]][
"longrange
Subcommand" on page 150).
Figure
46).
...]|
...]|
...]|
...]|
...]|
...] |
...]|
...]|