HP XP20000 User Manual page 137

Operand Window
of Per-
formance
Monitor
URJNL
URLU
URLDEV
LDEV tab in
the Auto
LDEVEachOfCU
LUN win-
dow
1
When you specify the PhyPG, PhyLDEV, PhyProc, or PhyCSW operand, you can select the storing period of the monitoring
data to be exported from short range or long range. When you specify other operands, the monitoring data in short range is
exported.
2
A ZIP file whose name is beginning with LDEV_.
3
A ZIP file whose name is beginning with RCLDEV_.
4
A ZIP file whose name is beginning with URLDEV_.
You can use the group command more than one time in a command file. For example, you can write
the following script:
group PortWWN CL1-A:CL1-B
group PPCG spmg01:spmg02
group RemoteCopy
If an operand is used more than one time in a command file, the last operand takes effect. In the
example below, the first group command does not take effect, but the second group command takes
effect:
group PortWWN CL1-A:CL1-B
group PortWWN CL2-A:CL2-B
Monitoring Data Saved in
the File
Statistics about remote copy
operations by XP Continuous
Access Journal and Universal
Replicator for Mainframe (at
journal groups)
Statistics about remote copy
operations by XP Continuous
Access Journal and Universal
Replicator for Mainframe (at LU
paths)
Statistics about remote copy
operations by XP Continuous
Access Journal and Universal
Replicator for Mainframe (at
volumes controlled by a
particular CU)
Statistics about volumes in par-
ity groups, in external volume
groups, or in V-VOL groups (for
volumes controlled by a particu-
lar CU)
XP24000/XP20000 Performance Monitor User Guide
Saved ZIP File See
Table
URJNL_dat.ZIP
21, page 114
Table
URLU_dat.ZIP
22, page 115
Table
4
URLDEV_XXXXX.ZIP
23, page 115
Table
2
LDEV_XXXXX.ZIP
24, page 117
137