HP XP20000 User Manual page 122

remote copy operations by XP Continuous Access and TrueCopy for Mainframe in short range.
You can describe multiple lines of the group command to export multiple monitoring items at the
same time.
For detailed information about the group command, see
shortrange 200610010850:200610010910 and longrange
200609301430:200610011430
The shortrange and longrange commands specify the term of monitoring data to be exported.
Use these commands when you want to narrow the export-target term within the stored data. You
can specify both the shortrange and longrange commands at the same time. The difference
between these commands is as follows:
The shortrange command is valid for monitoring data in short range. You can use this
command to narrow the export-target term for all the monitoring items you can specify by the
group command.
Specify a term within Short Range From XXX To XXX which is output by the show com-
mand.
The longrange command is valid for monitoring data in long range. You can use this com-
mand only when you specify the PhyPG, PhyLDEV, PhyProc, or PhyCSW operand with the
Long option in the group command. (The items that can be saved by these operands are the
monitoring data displayed in the Physical tab of the Auto LUN window with selecting longrange.)
Specify a term within Long Range From XXX To XXX which is output by the show com-
mand.
In Figure 38, the script shortrange 200610010850:200610010910 specifies the term 8:50-
9:10 on Oct. 1, 2006. This script is applied to the group RemoteCopy command in this example.
When you run the Export Tool, it will export the statistics about remote copy operations by XP
Continuous Access and TrueCopy for Mainframe in the term specified by the shortrange com-
mand.
Also, in Figure 38, the script longrange 200609301430:200610011430 specifies the term
from Sep. 30, 2006, 14:30 to Oct. 1, 2006, 14:30. This script is applied to the group PhyPG
Long command in this example. When you run the Export Tool, it will export the usage statistics
about parity groups in the term specified by the longrange command.
If you run the Export Tool without specifying the shortrange or longrange command, the
monitoring data in the whole storing period (data in the period displayed by the show command)
will be exported.
For detailed information about the shortrange command, see
mand" on page 148.
For detailed information about the longrange command, see
mand" on page 150.
outpath out
This script specifies that files should be saved in the directory named out in the current directory.
The outpath command specifies the directory in which files should be saved. For detailed inform-
ation about the outpath command, see
option compress
This script specifies that the Export Tool should compress monitoring data in ZIP files.
The option command specifies whether to save files in ZIP format or in CSV format. For detailed
information about the option command, see
apply
122 Using the Export Tool
"group
"outpath Subcommand" on page 152.
"option Subcommand" on page 153.
Subcommand" on page 134.
"shortrange Subcom-
"longrange Subcom-