Panasonic SC-PT350W Operating Instructions Manual page 39

■ Sound abnormal or improper
Sound is distorted.
Effects do not work.
Humming is heard during play.
No sound.
■ Picture abnormal or unviewable
The picture on the television is
not displayed correctly or
disappears.
Picture stops.
Picture size does not fi t the screen. • Change "TV Aspect" in the "Video" tab.
Menu is not displayed correctly.
Auto zoom function does not work
well.
When playing PAL disc, picture is
distorted.
■ Progressive video
There is ghosting when
progressive or HDMI output is on.
Pictures not in progressive output. • Select "480p" or "576p" in "Video Output Mode" in Picture Menu.
Closed captions not displayed.
• Noise may occur when playing WMA.
• When using the HDMI output, audio may not be output from other terminals.
• Some audio effects do not work or have less effect with some discs.
• Dolby Pro Logic II does not work if you have changed the play speed.
• An AC mains lead or fl uorescent light is near the main unit. Keep other appliances
and cables away from the main unit (and wireless systems).
• There may be a slight pause in sound when you change the play speed.
• Audio may not be output due to how fi les were created.
• Ensure that the wireless system is connected to the mains socket, and
" " is displayed on the main unit's display.
• Audio may not be heard when more than 4 devices are connected with HDMI
cables. Reduce the number of connected devices.
• When using the HDMI connection, ensure that "Audio Output" in the "HDMI" tab is
set to "On".
• The unit and television are using different video systems.
Use a multi-system or PAL television.
• The system used on the disc does not match your television.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL television
("NTSC Disc Output" in "Video" tab).
• Ensure that the unit is connected directly to the television, and is not connected
through a video cassette recorder.
• Mobile telephone chargers can cause some disturbance.
• If you are using an indoor television antenna, change to an outdoor antenna.
• The television antenna wire is too close to the unit. Move it away from the unit.
• Change "Source Select" in Picture Menu.
• Picture may not be seen when more than 4 devices are connected with HDMI
cables. Reduce the number of connected devices.
• When using HDMI output, the video signal is progressive. Use other video
connections if your television is not compatible with progressive video.
• If the picture is distorted or not displayed when using HDMI output, press and hold
[CANCEL] until the picture is displayed correctly. (The output will return to "480p"or
"576p".)
• When using the COMPONENT VIDEO OUT terminal, ensure that progressive
output is not selected when the connected television is not progressive compatible.
Press and hold [CANCEL] until the picture is displayed correctly. (The output will
return to "480i" or "576i".)
• When using SCART (AV) terminal, set "Video mode" in the "HDMI" tab to "Off".
• Picture may stop if the DivX fi les are greater then 2 GB.
• Use the television to change the aspect. If your television does not have that
function, change "4:3 Aspect" in Display Menu.
• Change the zoom setting. ("Just Fit Zoom" or "Manual Zoom" in Display Menu)
• Restore the zoom ratio to "x 1.00". ("Manual Zoom" in Display Menu)
• Set "Subtitle Position" in Display Menu to "0".
• Set "4:3 Aspect" in Display Menu to "Normal".
• Turn off television zoom function.
• Use the other preset aspect ratios or manual adjustment.
• Zoom function may not work well, especially in dark scenes and may not work
depending on the type of disc.
• Set "Transfer Mode" in Picture Menu to "Auto".
• This problem is caused by the editing method or material used on DVD-Video,
but should be corrected if you use interlaced output. Set "Video Output Mode" in
Picture Menu to "480i" or "576i". (Alternatively, press and hold [CANCEL] to switch
to "480i" or "576i".)
• Disable the HDMI AV OUT connection and use other video connections. Make the
settings in the following order:
1 Set "Video Mode" in the "HDMI" tab to "Off".
2 Set "Video Output Mode" in Picture Menu to "480i" or "576i". (Alternatively, press
and hold [CANCEL] to switch to "480i" or "576i".)
• The unit's VIDEO OUT or SCART (AV) terminal outputs an interlaced signal even if
"PRG" is displayed.
• When HDMI or progressive output is on, closed captions will not be displayed.
Page
—
—
—
—
—
—
—
11
—
27
—
—
27
34
—
—
—
24
—
13
—
13
27
—
27
25
25
25
25
25
—
25
—
24
24
27
24
24
13
—
39
RQT8043