Table of Contents
Advertisement
Special instructions
for programmable
settings
Alarm
You can set one of 2 different alarm
options (once or daily) at a time for each
handset. An alarm sounds at the set time
for 3 minutes.
Important:
L Set the date and time beforehand
(page 15).
1
K (middle soft key)
2
{V}/{^}: "Handset Setup" i
M
3
{V}/{^}: "Time Settings" i
M
4
{V}/{^}: "Alarm" i M
5
{V}/{^}: Select the desired alarm
option. i M
"Off"
Turns alarm off. Press M again,
then press {ih} to exit.
"Once"
An alarm sounds once at the set
time. Enter the desired date and
month.
"Daily"
An alarm sounds daily at the set time.
6
Set the desired time. i M
7
{V}/{^}: Select the desired ringer
tone. i M 2 times
L We recommend selecting a
different ringer tone to the one
used for outside calls.
L When the alarm is set, E is
displayed.
8
{ih}
Note:
L You can skip to step 4 by pressing
{R/E} in standby mode.
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
L If you select "Once", the setting
changes to "Off" after the alarm
sounds.
L Even when the ringer volume for
outside calls is set to off (page 23), the
alarm sound is heard at a low level.
Time adjustment (Caller ID
subscribers only)
This feature allows the unit to
automatically adjust the date and time
each time caller information is received.
To use this feature, your caller ID service
has to provide caller information,
including date and time. Contact your
service provider/telephone company for
details.
To turn this feature on, select "Caller
ID[Auto]". To turn this feature off,
select "Manual".
Important:
L To use this feature, set the date and
time first (page 15).
1
K (middle soft key)
2
{V}/{^}: "Handset Setup" i
M
3
{V}/{^}: "Time Settings" i
M
4
{V}/{^}: "Time Adjustment" i
M
5
{V}/{^}: Select "Caller
ID[Auto]" or "Manual". i M
i {ih}
Programming
25
Advertisement
Table of Contents
