Intercom/Locator; Intercom; Transferring Calls - Panasonic KX-TG7341NZ Operating Instructions Manual

Intercom/Locator

Intercom

Intercom calls can be made:
– between handsets.
– between the handset and base unit.
Note:
L If you receive an outside call while
talking on the intercom, you hear
interrupt tones.
– To answer the call with the handset,
press {ih}, then press {C}.
– To answer the call with the base
unit, press {s} 2 times.
L When paging unit(s) for an intercom
call, the paged unit(s) beeps for 1
minute.
Making an intercom call
Handset
1
{INT}
2
To page the base unit, press {0}.
To page a specific handset, enter the
handset number.
L To stop paging, press {ih}.
3
When you finish talking, press
{ih}.
Base unit
1
{x}
L When only 1 handset is
registered, the base unit pages
the handset automatically.
2
To page a specific handset, enter the
handset number.
To page all handsets, press {0}.
L To stop paging, press {x}.
L When you page all handsets, only
the handset user who answers
first can take the intercom call.
3
When you finish talking, press {s}.
38
Note:
L When more than 2 handsets are
registered, the base unit pages all
handsets a few seconds after
pressing {x} in step 1.
Answering an intercom call
Handset
1
Press {C} to answer the page.
2
When you finish talking, press
{ih}.
Base unit
1
Press {x} to answer the page.
2
When you finish talking, press {s}.
Note for handset and base unit:
L Even when the ringer volume for
outside calls is set to off (page 17, 23),
the handset and/or base unit rings at a
low level for intercom calls.

Transferring calls

Outside calls can be transferred
between 2 handsets, or between the
handset and base unit.
Handset
1
During an outside call, press {INT}
to put the call on hold.
2
To page the base unit, press {0}.
To page a specific handset, enter the
handset number.
3
Wait for the paged party to answer.
L If the paged party does not
answer, press {INT} to return to
the outside call.
4
To complete the transfer, press
{ih}.