Special Instructions For Programmable; Settings - Panasonic KX-TG4321 Operating Instructions Manual

Special instructions
for programmable

settings

Night mode
Night mode allows you to select a span
of time during which the handset will not
ring for outside calls. This feature is
useful for instances when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for each
handset.
Important:
L Set the date and time beforehand
(page 14).
L We recommend turning the base unit
ringer off (page 16) and call screening
off (page 30) in addition to turning the
night mode on.
L If you have set the alarm, the alarm
sounds even if the night mode is
turned on.
Setting the start and end time
1
{MENU} i {#}{2}{3}{7}
2
Enter the desired hour and minute
you wish to start this feature.
3
{AM/PM}: Select "AM" or "PM". i
{V}
4
Enter the desired hour and minute
you wish to end this feature.
5
{AM/PM}: Select "AM" or "PM".
6
{Save} i {OFF}
Note:
L To correct a digit, press {^}, {V}, {<},
or {>} to move the cursor to the digit,
then make the correction.
Turning night mode on/off
1
{MENU} i {#}{2}{3}{8}
For assistance, please visit http://www.panasonic.com/help
2
{V}/{^}: Select "On" or "Off". i
{Save} i {OFF}
Note:
L When the night mode is turned on,
"Night mode" is displayed during
the selected period.
Alarm
You can set one of 2 different alarm
options (once or daily) at a time for each
handset. An alarm sounds at the set time
for 1 minute.
You can choose an alarm sound from 3
tones and 4 melodies.
Important:
L Set the date and time beforehand
(page 14).
1
{MENU} i {#}{7}{2}{0}
2
{V}/{^}: Select the desired alarm
option. i {Select}
Turns alarm off. Go to
Off
step 5.
An alarm sounds once at
Once
the set time. Enter the
desired month, date, and
year.
An alarm sounds daily at
Daily
the set time.
3
Set the desired time. i {OK}
4
{V}/{^}: Select the desired ringer
tone. i {Save}
L If you set a tone or melody, we
recommend selecting a different
one for outside calls.
5
{OFF}
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
Programming
25