Konica Minolta bizhub PRO 1050P User Manual page 42

42 • Windows Printing
Type allows you to select the following settings for the selected pages:
•
Same as Body – job setting
•
Insert Blank Sheet – an empty sheet shall be inserted after the
selected pages. If duplex printing is requested, the selected page is
forced on a new sheet if necessary. E.g., if the job shall be printed
duplex, and a page inserted after page 7, then page 7 will have an
empty back page, and page 8 will be on a new sheet, after the
inserted sheet.
•
Print Single Sided – simplex printing (possibly different from the
job setting)
•
Print Double Sided – duplex printing (possibly different from the
job setting)
The tray selected under Source specifies that the given pages shall be drawn
from this tray. In the above example, page 18 to 25 and 27 to 29 are printed on
paper fed from tray 3 and page 37 is printed on paper fed from tray 2.
Hole-Punch and Staple allow to select punching and stapling different from the
job setting.
Finish Staple determines that the set to be stapled ends with the specified page.
If the following pages are still to be stapled, they will form a new set.
Konica Minolta bizhub PRO 1050 Printer Driver