Default Setting - Konica Minolta bizhub PRESS C1070P Quick Manual

3.1 Installing the Printer Driver

)Default setting

Check that optional information of this machine is configured correctly on the printer driver.
0
If optional information of this machine is not configured correctly on the printer driver, you cannot use optional
functions. If any optional function is mounted, be sure to configure a setting.
A
Select a print command of the application, then select the required printer name from
[Print].
B
Select [bizhub PRESS C1070/C1060PS]
from the pull-down list in the window,
then click [Settings].
C
Click on the upper right corner of the
window, then click [Configure] that is
displayed.
Check that
[Acquire Device Information]. If this mark is not
shown, click [Acquire Device Information] to
acquire device option information.
NOTICE
If you have failed to acquire device option information,
check the network setting.
D
Click [OK].
The device option information setting is then completed.
3-8
is shown on the right-hand side of