Preparation; Connections - Panasonic KX-TG5431 Operating Instructions Manual

Connections

Base unit
Raise the antennas.
Charger unit (KX-TG5432 and KX-TG5433 only)
Note:
L Base unit: Use only the included Panasonic AC adaptor PQLV1.
L Charger unit: Use only the included Panasonic AC adaptor KX-TCA1.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L The unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using the Panasonic
KX-J66 T-adaptor. Emergency power can be supplied to the unit by connecting a
Panasonic battery back-up power supply noted on page 5.
For assistance, please call 1-800-211-PANA (7262).
Fasten the AC adaptor cord.
To power outlet (120 V AC, 60 Hz)
AC adaptor
To single-line telephone jack (RJ11C)
Telephone line cord
To power outlet (120 V AC, 60 Hz)
AC adaptor

Preparation

Hook
9