Konica Minolta bizhub C30P Reference Manual page 256

Item
Default Gateway* If a router is used on the network, sets the router's
Raw Port
RAW Port
Number
RAW Port
Bidirectional
Host Name
Domain Name
DNS Server
Dynamic DNS
238
Description
address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
If the specified router address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - DEFAULT GATEWAY
Select whether or not RAW port is used.
Choices: Enable, Disable
Default: Enable
Identifies the number of the printer's RAW port.
Choices: 1 - 65535
Default: 9100
Select whether or not RAW port bi-directional
transmission is used.
Choices: Enable, Disable
Default: Disable
Specifies the host name.
Range: Up to 63 characters
Default: C30P-xxxxxx
xxxxxx displays six last digits of the MAC address
in hexadecimals.
Specifies the domain name.
Range: Up to 63 characters
Default: [Blank]
Specifies the DNS server. Up to three can be registered.
Default: 0.0.0.0
Select whether or not Dynamic DNS is used.
Choices: Enable, Disable
Default: Disable
Configuring the Printer