Konica Minolta bizhub C30P Reference Manual page 176

Item
Tray3
This item
appears only if
the optional
lower feeder unit
is installed.
Tray4
This item
appears only if
the optional
lower feeder unit
is installed.
Tray Chaining
Tray Mapping
158
Description
Paper Size Indicates the setting for the size of paper
loaded into Tray 3.
Paper Type Indicates the setting for the type of paper
loaded into Tray 3.
Paper Size Indicates the setting for the size of paper
loaded into Tray 4.
Paper Type Indicates the setting for the type of paper
loaded into Tray 4.
If Enable is indicated and the specified
paper tray runs out of paper during print-
ing, a paper tray loaded with paper of the
same size is automatically selected so
printing can continue.
If Disable is indicated and the specified
paper tray runs out of paper, printing
stops.
Tray Mapping If On is indicated, Tray Mapping function
Mode is used.
If Off is indicated, Tray Mapping function
is not used.
Logical Tray Indicates the tray that is used for printing
0-9 when a print job is received from another
manufacturer's printer driver.
Viewing Printer Status