If The Following Appear On Your Display - Panasonic KX-TG5230AL Operating Instructions Manual

TG5230AL.fm Page 65 Friday, June 11, 2004 5:31 PM
Cancelling Registration/Re-registration
If you have not cancelled the handset's registration at the previous base unit
(p. 63), the handset number remains in that base unit's memory. To erase the
handset number from the previous base unit, see the base unit's Operating
Instructions. For the KX-TG5230AL base unit: (1) Press and hold [LOCATOR/
INTERCOM/TRANSFER] for 3 seconds, and (2) Press and hold the handset
( ) to
number [1] [4]
sounds, then the handset number is erased.

If the Following Appear on Your Display...

The following will be displayed when the unit needs your attention.
Display message
Recharge battery
Charge for 6 HRS
No link to base.
Move closer to
base and try
again.
Please lift up
and try again.
Busy
Invalid
( )
that you do not want for 5 seconds. A long beep
Cause & Remedy
• The battery needs to be charged. Recharge the
battery (p. 13).
• The battery has been discharged. The handset will
not work. Fully charge the battery (p. 12).
• The handset has lost communication with the base
unit. Walk closer to the base unit, and try again.
• Confirm the base unit's AC adaptor is plugged in.
• Raise the base unit antennas.
• The handset's registration may have been cancelled.
Re-register the handset (p. 64).
• A handset button was pressed while the handset was
on the base unit (or the charger, for accessory
handset users, p. 3). Lift the handset and press the
button again.
• The called base unit or handset is in use.
• Privacy mode is on for the call you tried to join
(p. 51).
• The handset you tried to send phone book items to is
in use.
• The handset you are calling is too far from the base
unit.
• The called handset has not been registered to the
base unit.
• You selected your own extension number.
65