Table of Contents
Advertisement
Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message
Busy
Dial locked
Error!!
---Incomplete---
Phonebook full
Invalid
No items stored
No link to base.
Move closer to
base, try again.
Phonebook full
Please lift up and
try again.
36
Cause/solution
L Another handset or the called handset is in use.
L The handset you tried to copy phonebook items to is in
*1
use.
L The handset you are calling is too far from the base
*1
unit.
L Dial lock is turned on. To turn it off, see page 20.
L The handset's registration has failed. Move the handset
and base unit away from all electrical appliances and try
again.
L Another handset user tried to send phonebook items to
you but there was an error. Have the other handset user
re-send the items to you (page 23).
L The entered password was wrong in programming dial
lock. Enter the correct password.
L The destination unit's phonebook memory is full. Erase
unnecessary items from the destination unit's
phonebook (page 22).
L There is no handset registered to the base unit
matching the extension number you entered.
L Your phonebook or redial list is empty.
L The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L Confirm that the base unit's AC adaptor is plugged in.
L Raise the base unit antenna.
L The handset's registration may have been cancelled.
Re-register the handset (page 33).
L There is no space to store new items in the phonebook.
Erase unnecessary items (page 22).
L A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.
*1
*1
*1
*1
Advertisement
Table of Contents
