Programmable settings
You can customise the unit by programming the following features using the handset. To
access the features, there are 2 methods: scrolling through the display menus (page 27)
or using the direct commands (page 29).
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2
Press {^} or {V} to select the desired menu. i {Select}
L If there is a sub-menu(s), press {^} or {V} to select the desired item. i {Select}
Example: To access the handset ringer tone setting
Press {^} or {V} to select "Ringer setting". i {Select}
Then press {^} or {V} to select "Ringer tone". i {Select}
3
Press {^} or {V} to select the desired setting.
L This step may vary depending on the feature being programmed.
4
{Save} i {OFF}
Main menu
Ringer setting
Voice enhancer
*1
Dial lock
Copy phonebook
Sub-menu 1
Ringer volume
Ringer tone
Interrupt tone
*2
Copy 1 item
Copy all items
Sub-menu 2
*2
–
–
Programming
Page
–
–
–
–
–
page 20
–
page 23
–
page 23
–
–
–
–
27