Yamaha YSP-2700 Owner's Manual page 78

Dynamic Range
➜
Setup Menu Sound
Adjust this unit's dynamic range (difference between maximum and minimum volumes).
Settings
Min: Sets dynamic range at a level that supports comfortable listening at low
volumes.
Min/Auto
Auto: Sets dynamic range in accordance with information received from input
signal.
Standard The dynamic range recommended for regular home use.
Max (default) Outputs sound without adjusting the dynamic range of the input signals.
• "Adaptive DRC" is automatically set to "Off" when the settings other than "Max" is selected.
Matrix Decoder
➜
Setup Menu Sound
Set the surround decoder.
When this unit plays back 2-channel or 5.1-channel sources in the surround mode,
surround decoder enables them playback for 7.1-channel. You can enjoy a variety of
surround sound effects by switching the decoder.
To enable a surround decoder, press the CINEMA DSP key to select "DSP Off".
Settings
DPL Movie*
(default)
➜
Dynamic Range
DPL Music*
DPL Game*
Neo:6 Cinema
Neo:6 Music
* The Dolby Pro Logic IIx surround decoder is used when 7.1-channel audio is output in
accordance with the selected "Channel Out" setting (p. 75).
• Decoders are disabled when stereo playback mode (p. 42), My Surround (p. 76), or target playback mode
(p. 42) is enabled.
• Dolby Pro Logic IIx Music parameters (Center Width, Panorama, and Dimension) can be adjusted from the
setup menu (p. 79).
❑
When "Surround Back" of "Channel Out" (p. 75) is set to "Yes" or "Auto", this unit
decodes 5.1-channel sources and then playback them in up to 7.1-channel surround.
One of the following decoders is automatically selected depending on the input
signals.
➜
Matrix Decoder
PCM, Dolby Digital, Dolby Digital EX, Dolby TrueHD, Dolby
Digital Plus
DTS, DTS-ES matrix, DTS-96/24, DTS-HD Master Audio, DTS-HD
High Resolution Audio, DTS Express
DTS-ES discrete
Use the Dolby Pro Logic II decoder suitable for movies.
Use the Dolby Pro Logic II decoder suitable for music.
Use the Dolby Pro Logic II decoder suitable for games.
Use the DTS Neo: 6 decoder suitable for movies.
Use the DTS Neo: 6 decoder suitable for music.
About the surround decoder for playback of 5.1-channel sources
Input signal (5.1 ch) Decoder
Dolby Pro Logic IIx Movie
Dolby Pro Logic IIx Music
DTS-ES matrix
DTS-ES discrete
SETTINGS ➤ Setup menu
En
78