Yamaha YSP-2700 Owner's Manual page 91

Menu
01.02 (The firmware version is displayed)
FW UPDATE
Start OK? (Firmware is updated)
INFO (Initialize all settings not related to the network)
2)
NET INFO (Initialize network related settings)*
INITIALIZE
CANCEL (Do not initialize) (default)
2)
Initializing this unit also initializes measurement results with IntelliBeam and settings stored in system memory. Perform "AUTO SETUP" from the "IntelliBeam" menu again (p. 32).
Settings/Adjustable range
Confirm firmware version/update firmware.
Reset the parameters of this unit to the factory presets. When the unit freezed, the problem may solve by
restoring to their default values.
* The following configurations will be restored if "INFO" is selected.
• Network Standby (p. 84)
• Bluetooth (p. 47)
Description
SETTINGS ➤ Advanced setup
91
En