Key Tone; Re-Registering The Handset; Display - Panasonic KX-TG2314 Quick Setup Manual

Key Tone

Handset
You can select whether or not the handset keys will sound tones (key tone,
confirmation tone, error tone). The factory preset is ON.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing [d] or [ ], then press
Select.
3
Scroll to "Key tone" by pressing [d] or [ ],
then press Select.
4
Select "Off" or "On" by pressing [d] or [ ].
5
Press Save, then press [OFF].

Re-registering the Handset

If "No link to base. Move closer to base, try again." is displayed
even when using the handset near the base unit, the handset may have lost
communication with the base unit. You need to re-register the handset to the base
unit.
• Have both handsets and base unit nearby during registration.
• Follow steps 1 and 2 listed below. You have about 1 minute to complete them.
• Confirm the extension number of the handset which has lost the
communication by placing the handset on the base unit or charger.
If you re-register the handset using the other handset's extension number ([1] or
[2]), the other handset will not function.
1
Base unit:
To re-register the handset 1, press and hold HANDSET LOCATOR [ ]
until the CHARGE indicator flashes.
To re-register the handset 2, press and hold HANDSET LOCATOR [ ]
until the CHARGE indicator flashes.
2
Handset:
Press and hold [FLASH/CALL WAIT] until
"Handset Registering" is displayed.
• When registration is complete, a beep sounds from
the handset and the display shows the number.
• Wait for 20 seconds after registration is
complete while the handset establishes
communication with the base unit.
• If the handset beeps 3 times and "Error!!" is displayed, an error occurred. Try
again from step 1.
• You can stop registration by pressing [OFF] on the handset, and pressing
HANDSET LOCATOR [ ] or [ ] on the base unit.
For assistance, please call: 1-800-211-PANA(7262)
Special Features
Key tone
Back
d
Key tone
:On
Back
Handset & Base Unit
Handset
Registering
Ex. Extension number 1
Handset [1]
Registered
Select
d Save