Flash Button - Panasonic KX-TG2352PW Operating Instructions Manual

Special Features

FLASH Button

Pressing
(FLASH/CALL!WAIT)
host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
•Pressing (FLASH/CALL!WAIT) causes to disable the Temporary Tone Dialing
mode or the mute (p. 46).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: "700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)". Your phone comes from the factory set to
"700 ms".
Make sure the unit is not being used and the handset is lifted off the
base unit.
Press
1
(MUTE/FUNCTION)
or
Ö Ñ
Scroll to "Set tel line" by pressing
2
or
Ö Ñ
3 Press
á
4 Scroll to "Set flash time" by pressing
or
Ö Ñ
Press
5
á
•The current setting is displayed.
6 Select the desired time by pressing
7 Press
á
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF)
•If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
48
, and press .
á
.
.
.
.
(Save key).
allows you to use special features of your
and scroll to "Initial set" by pressing
or
Ö
Caller ID edit
H
Set tel line
Voice mail
Set dial mode
H
Set flash time
Set line mode
Set flash time
GF
.
Ñ
.
:700ms
H
=Save