Panasonic KX-PS8000 Reference Manual page 142

Troubleshooting
Error message
There was an error
writing to KXPS8000GDI:
for the printer (Panasonic
KX-PS8000):
The printer is not ready.
Make sure it is turned on
and on-line. To continue
printing, click retry.
Windows will automatically
retry after 5 seconds
Unable to Allocate
Memory!!
Some applications settings may take priority over the printer driver settings.
142
Possible cause
B Cable connection is improper or
the printer is not ready.
B The terminator setting is
improper.
The memory for printing is
insufficient.
Recovery
Perform the following procedure.
1. Confirm that the terminator is correctly
set.
2. Confirm that the printer is ready.
3. Confirm that the printer is correctly
connected with a SCSI cable.
4. Turn off the computer, then turn it on
again.
B Close the windows of the applications
except for the one which controls the
printer, then print it again.
B Turn off the computer, then turn it on
again. Then print the document again.