Panasonic KX-TCD510NZ Operating Instructions Manual page 52

Multi-Unit User Operations
Cancelling a Handset
Each handset can cancel itself or another handset. This feature is usually used to cancel
a link between Handset and Base Unit.
To exit the operation, press
1
Press JOYSTICK (or move).
3
Enter 4-digit Base Unit PIN.
(Factory Preset 0000)
5
Search and press RIGHT SOFT
KEY to attach " " to the
handset(s) to cancel.
Cancelling a Base Unit
If another handset is out of range and/or power is OFF when Cancelling a Handset, the
previous base unit number will still remain in the cancelled handset. Therefore, you need
to cancel the base unit registered in the cancelled handset.
To exit the operation, press
Follow steps 1 to 3 on the previous page, then:
4
Select "Cancel Base".
6
Search and press RIGHT SOFT KEY
to attach " " to the base unit to
cancel.
8
Select "Yes", then "Deleted" is
displayed.
52
at any time.
2
Select "
4
Select "Cancel Handset".
6
Press JOYSTICK.
at any time.
5
Enter 4-digit Handset PIN.
(Factory Preset 0000)
7
Press JOYSTICK.
Setting Base".