Panasonic KX-TCD510NZ Operating Instructions Manual page 38

Handset Settings
Setting the Ringer Volume
The choices are 6 levels and off. If you set the volume to OFF, "
however, the paging and intercom call volumes will be at level 1.
1
Press JOYSTICK
(or move).
4
To increase volume, move the JOYSTICK up.
To decrease volume, move the JOYSTICK down.
• The factory preset is 6.
Selecting the Ringer Pattern for External Call/Internal Call/Paging
Follow steps 1 to 2 shown above, then:
3
Select "EXT Ringer Type", "INT
Ringer Type" or "Paging Tone".
• The factory preset is 1.
Selecting the Ringer Pattern for Private Ring
Follow steps 1 to 2 shown above, then:
3
Select "Private
Ring".
• The factory preset of each ringer pattern is 1.
38
2
Select "
Ringer
Option".
4
Select the desired ringer pattern.
4
Select the desired
category.
" is displayed,
3
Select "Ringer
Volume".
5
Press JOYSTICK.
5
Select the desired
ringer pattern.