Table of Contents
Advertisement
•Caller information cannot be displayed in the following cases:
•—If the caller dialled from an area which does not provide a Caller ID service,
the display will show "Out of area".
•—If the caller has requested not to display his/her information, the display will
show "Private caller".
•If your unit is connected to a PBX which does not support Caller ID services, you
cannot access those services.
•If the name and the time/date display service is available in your area, the
display will show callers' names and the time/date the calls were received.
For further information, please contact your telephone company.
For New Zealand Users:
Your telephone company may not support the second caller display feature.
To check the number of new calls
When new calls have been received, the CALLER ID indicator flashes slowly
on the base unit. The handset displays show the number of new calls.
While the handset is on the base unit:
If you have received 10 new calls,
the display will show the following.
10 new calls
When you lift the handset, the display
changes to the following.
10 new calls
G
=New
•After 10 seconds, the display changes to
the standby mode (p. 15).
While the handset is off the base unit:
Press
or
Ü
á
If you have received 10 new calls,
the display will show the following:
10 new calls
G
=New
•If "No items stored" is displayed, the Caller List is empty.
F
=Old
to turn the display on.
F
=Old
35
Advertisement
Table of Contents
