Installing The Battery In The Handset; Battery Charge - Panasonic KX-TC1230ALW, KX-TC1230NZW Operating Instructions Manual

Settings

Installing the Battery in the Handset

Install the battery in the handset and close the handset cover, locking it
into place.
Black
Lead

Battery Charge

Place the handset on the
base unit and charge for
about 10 hours before
initial use.
•The IN USE/CHARGE
indicator lights and a beep
sounds.
Battery strength
You can check the battery strength on the handset display while the
handset is on the base unit, while it is in use (making/answering a call
etc.), or after viewing the Caller List or directory items, programming etc.
The battery strength will remain for a few seconds after using the
handset, then the display will return to the standby mode (p. 15).
The battery strength is as shown in the chart below.
Display prompt
14
Red
Lead
(flashing)
H
IN USE/CHARGE Indicator
Battery strength
Fully charged
Medium
Low
Needs to be recharged.
OR