Wheels And Tires; If Your Avenger™ Does Not Operate; Lubrication - Golden Technologies Golden Avenger GA 541 Owner's Manual

Avenger Owner's Manual
XI. CARE AND MAINTENANCE

Wheels and Tires

Your Avenger™ scooter is equipped with pneumatic tires with "split-rim" wheels.
ALL OF THE AIR HAS BEEN RELEASED THROUGH VALVE
STEMS.
How to change a tire assembly:
1. Remove the center nut.
2. Remove the tire assembly from the scooter
3. Install a new tire assembly onto the axle.
4. Install and tighten the center nut.
NOTE: All tires on your Avenger ™ are pneumatic.
IF YOUR AVENGER™ DOES NOT OPERATE
• Make certain that the brake handle is set to the engaged (forward)
position.
• Check the main circuit breaker. If necessary, reset the circuit breaker.
• Make certain that the speed adjustment dial is at the desired setting.
• Be sure that the key is all the way in the key receptacle and the scooter is
"ON" (note, the green "LED" light is illuminated)
IF NONE OF THE ABOVE PROCEDURES SOLVE THE PROBLEM, CONTACT
YOUR AUTHORIZED GOLDEN TECHNOLOGIES DEALER.

LUBRICATION

All of the bearings on your Golden Avenger™ are permanently lubricated and
sealed.
•
No lubrication is required
•
Do not lubricate the motor or transaxle.
NEVER DISASSEMBLE WHEELS UNLESS
31
Revised 10/27/14