Troubleshooting - Panasonic WV-LC1710 Operating Instructions Manual

TROUBLESHOOTING

Phenomenon
Power is not turned on.
NO SIGNAL
is displayed on the center
of the screen and picture is not dis-
played.
Color is abnormal (red and blue is reverse,
sync is not in order) during Component
Input.
Menu is not displayed even if
button is pressed.
Volume cannot adjust even if the
button is pressed.
Input signal cannot change even if the
INPUT SELECT
button is pressed.
Position of picture display during PC
input is shifted.
The power cord insulation is damaged.
The power cord and the power plug of
the AC Adapter are hot during use.
The power cord gets warm or hot if bent
or pulled during use.
20
Cause
DC input terminal of the AC Adapter is
not properly connected.
Power supply plug is not properly con-
nected.
The AC cord is not properly connected to
the AC Adapter.
Cable is not properly connected.
Cable is not connected to respective
signal input.
Connection of the input signals are not in
proper order (Y, Cb, Cr).
MENU
Menu is not displayed when there is no
input signal.
- +
or
Volume cannot be adjusted when picture
is not displayed.
INPUT SELECT
The
while onscreen display of
displays on the screen.
The timing data of connected PC is not
supported.
The power cord or the plug is damaged.
If you continue to use it, a fire or electric
shock may occur.
Connect the DC input terminal of the
AC Adapter to DC IN connector of this
monitor.
Connect the power supply plug to the
AC outlet.
Connect the AC cord to the AC Adapter.
Connect the respective cable properly.
Connect the cable properly to its respec-
tive input.
Rearrange to connect the cables in prop-
er order.
Press the
change the input signal.
Press the
change to channel with input.
button is pressed Press the
PROCESSING
onscreen display of
appeared.
Press the
tuning.
In cases when it is still shifted, read
page 19 and follow the procedure for
auto tuning.
Unplug the AC Adapter immediately,
and refer servicing to qualified service
personnel.
What to do
INPUT SELECT
button to
INPUT SELECT button to
INPUT SELECT
button after
PROCESSING
dis-
AUTO
button for automatic