Setting Of Composite Video / S-Video / Component Video Input - Panasonic WV-LC1710 Operating Instructions Manual

Setting of Composite Video / S-Video / Component Video Input

1. Display the Video Adjustment Menu.
(Refer to page 15)
VIDEO IN
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
VOLUME
H-POSITION
COLOR TEMP
SCAN
LANGUAGE
NORMAL SETTINGS
VIDEO IN
BRIGHT
CONTRAST
SHARPNESS
COLOUR
TINT
VOLUME
H-POSITION
COLOUR TEMP
SCAN
LANGUAGE
NORMAL SETTINGS
2. Move the cursor to each setting parameter listed below with the
PIP or POS button, then adjust the level of the selected
item with the - or + button.
Item Effect
BRIGHT
Darker Brighter
CONTRAST
Less
SHARPNESS
Soft
COLOR
(PAL: COLOUR)
Less
TINT
(NTSC ONLY)
Greenish Reddish
VOLUME
Decrease Inccrease
H-POSITION
Left
Notes:
BRIGHT CONTRAST
• ,
and TINT can be set to different values for each input
signal.
• TINT applies for NTSC system only.
16
NTSC
0
0
0
0
0
0
0
STANDARD
FULL
ENGLISH
PAL
0
0
0
0
-
0
0
STANDARD
FULL
ENGLISH
Indicator
More
Sharp
More
Right
SHARPNESS COLOR
, ,
3. Move the cursor to the
TEMP
(PAL) parameters with the
select color temperature of display with
STANDARD
9300K
6500K
4. Move the cursor to the
POS button, then select scanning area with
FULL : Vertical and horizontal picture size are equal to
the display panel size. Picture aspect ratio is dis-
regarded and the vertical size of picture is a little
stretched.
OVER
: The vertical size of picture is fitted to the height of
the display panel.
Picture is cut on left and right sides for making the
expansion ratio of both vertical and horizontal size
into 1 : 1.
UNDER
: The horizontal size of picture is fitted to the width
of the display panel.
Black horizontal bar appears on top and bottom of
the picture for making the expansion ratio of both
vertical and horizontal into 1 : 1.
5. Move the cursor to the
PIP
the or
with the - or + button.
Pressing the button repeatedly displays the language as shown
below.
,
COLOR TEMP (NTSC) or
PIP POS
or
- +
or button.
: Pictures are displayed in normal
color temperature.
: Pictures are displayed in bluish
color temperature.
: Pictures are displayed in reddish
color temperature.
SCAN
parameter with the
-
LANGUAGE
parameter in the menu with
POS
button, then select the desired language
COLOUR
button, then
PIP
or
or + button.