ProForm 5.0 ZLT User Manual page 8

3. Tighten a 3/8" x 2 1/4" Screw (1) and a 3/8" x
3/4" Screw (4) into the Base (36) and into the
Right Upright (102) as shown; do not fully
tighten the Screws yet.
Repeat this step on the left side of the tread-
mill. Then, tighten all four Screws (1, 4).
4. Pivot the Handrails (69) down to the horizontal
position.
3
4
8
102
4
36
69
69
1