BMW K 1200 S Rider's Manual page 112

6
110
• Pull the lamp housing on the
screw connection side out of
the mirror housing.
• Remove the bulb holder 2
from the lamp housing by
turning it counter-clockwise.
• Remove the bulb 3 from the
bulb holder.
Assembly is in reverse order.
• To hold the new bulb, use a
clean, dry cloth.
Replacing rear turn signal
bulb
During the work de-
scribed in the following,
a motorcycle that has been
parked incorrectly can fall
over.
Make sure that the motorcycle
is securely parked.c
• If necessary, switch off the
ignition.
• Remove the bolt 1.
• Pull the lamp housing on the
screw connection side out of
the turn signal housing.