BMW K 1200 S Rider's Manual page 110

• The high-beam headlight
6
bulbs are changed in the
same way as those of the
108
low-beam headlight.
Replacing parking
light
During the work de-
scribed in the following,
a motorcycle that has been
parked incorrectly can fall over.
Make sure that the motorcycle
is securely parked.c
1 Parking light
2 Access beneath the
headlight
3 Connector
4 Bulb holder
5 Bulb
• If necessary, switch off the
ignition.
• Pull off the connector 3
beneath the headlight.
• Remove the bulb holder 4
from the headlight housing
by turning it counter-clock-
wise.
• Pull the bulb 5 from the bulb
holder.
Assembly is in reverse order.
• To hold the new bulb, use a
clean, dry cloth.
Replacing brake light and
rear light bulbs
During the work de-
scribed in the following, a
motorcycle that has been
parked incorrectly can fall
over.
Make sure that the motorcycle
is securely parked.c
• If necessary, switch off the
ignition.
• Remove the seat (
b
40) .