Car Type - Kenwood DNX8160S Instruction Manual

Location (Only for Front, Rear)
Select the speaker position you have fixed.
Tweeter (Only for Front)
You can set the tweeter when you are
selecting front speakers.
None, Small, Middle, Large
X'over
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was set
automatically when you selected the speaker
type.
Crossover network setup
For details, see
(P.84)
5
Select an item.

Car Type

You can setup the car type and speaker
network, etc.
• If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each channel)
to have the highest surround effects.
Speaker
Front
OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm,
18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Rear
None, OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm,
17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Subwoofer
None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over
• Select "None" if you have no speakers.
Location
Front
Select the location from "Upper Door Area"/
"Lower Door Area"/ "On Dash"/ "Under Dash".
Rear
Select the location from "Upper Door Area"/
"Lower Door Area"/ "Upper Cargo Area"*
"Lower Cargo Area"* 1 / "Upper 3rd Row Area"*
"Lower 3rd Row Area"*
*1 "Compact"/ "Wagon"/ "SUV"
*2 "Minivan"/ "Minivan (Long)"
*3 "OFF"/ "Full Size Car"
When Speaker network is set to 3
way: (DNX8160S only)
Speaker
Tweeter
Small, Middle, Large
Mid Range
OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm,
18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Woofer
None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over
Location
Mid Range
Select the location from "Upper Door Area"/
"Lower Door Area"/ "On Dash"/ "Under Dash".
NOTE
• For how to switch to the 3-way speaker system,
3 way speaker system setup
see
Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
• Select "None" if you have no speakers.
Controlling Audio
/
1
2 /
/ "Parcel Shelf Area"*
2 3
(P.85).
83