Radio; Radio Basic Operation - Kenwood DNX8160S Instruction Manual

Radio

Radio

Radio Basic Operation

Most functions can be controlled from the source control screen.
To enter Radio source, touch [Radio] icon in the HOME screen.
NOTE
• Set the remote control mode switch to AUD mode before starting operation, see
(P.95).
1 Information display
Displays the information of the current station: Frequency, PS name
2 [AUTO1]/ [AUTO2]/ [MANUAL]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
3 [FM] [AM]
Switches the band.
4 Preset key
Recalls the memorized station. When touched for 2 seconds, stores the current receiving station in
memory.
5 Function bar
• [E] [F]: Tunes in a station. The method of frequency switching can be changed. (see 2 in table).
• [AME]: Presets stations automatically. For details, see
• [ ]: Touch to display the Radio SETUP screen. For details, see
• [ ]: Touch to mute or not to mute.
6 [PTY] (FM Tuner only)
Searches a program by setting program type. For details, see
7 [MONO] (FM Tuner only)
Select the Monaural reception.
8 [TI] (FM Tuner only)
Sets the traffic information mode on. For details, see
46 46
2
3
4
5
Switching the operation mode
Auto memory (P.50).
Radio Setup
Search by program type
Traffic Information (P.52).
1
8
7
6
(P.55).
(P.51).