Radio; Radio Basic Operation - Kenwood DNR876S Instruction Manual

Radio

(DNX576S / DNR46EX / DNR476S)

Radio Basic Operation

Most functions can be controlled from the
source control screen.
To listen to the Radio source, touch [Radio]
icon on the source selection screen. (P.15)
NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.104).
Control screen
1
2
6
5
3
Open the drawer
6
Close the drawer
6
Information display
1
• Displays the information on the current station:
Frequency
Touching [
Content A and Content B.
Content A: PS name, Radio Text, Title & Artist
Content B: PTY Genre, Radio Text plus
Preset#: Preset number
• Change the text size of the information smaller
when the "Small Audio Text" is set to "ON" in
the User Interface screen (P.90).
Seek mode
2
Touch to switch seek mode in the following
sequence: [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in the memorized stations one
4
after another.
• [MANUAL]: Switches to the next frequency
manually.
Operation keys
3
• [E] [F] : Tunes in a station. The method of
switching frequencies can be changed (see
Seek mode).
• [ ] : Displays the Graphic Equalizer screen.
(P.98)
4
Preset list
4
• Touching [ ]/[ ] allows you to change the
display size.
• Recalls the memorized station.
• When touched for 2 seconds, stores the
currently being received station in the
memory.
4
Band buttons
5
Switches bands (between FM and AM).
Function panel
6
Touch the left side of the screen to display the
7
function panel. Touch again to close the panel.
• [TI] (FM only) : Selects the traffic information
mode. For details, see Traffic Information
(P.53).
• [AME] : Presets stations automatically. For
details, see Auto memory (P.52).
] allows you to switch between
Radio
2
51
English