Setting The Message Centre Number - Panasonic A210 Operating Instructions Manual

Setting the Message centre number

Your connection settings must be configured before using the
service. The Message centre number may be preprogrammed.
Changing this number may cause failure of a text message.
d Main menu > Messages > Settings > Message centre
1. Enter your Message centre number in the international dialling
format 7 [5] (OK) (See "International dialling" on page 23.)
Other SMS settings
d Main menu > Messages > Settings
1. [192] to scroll to the required setting 7 [5] (Select)
Protocol
Illumination
Validity period
Delivery
report
SMS via GPRS
Select the protocol type which specifies the format your
message is converted to.
[192] to scroll to Standard text, Fax, X.400, Paging,
ERMES or E-mail 7 [5] (Select)
Decide whether or not you want the Indicator light to be
illuminated when receiving or viewing an Illumination
message.
[192] to scroll to Receiving or Viewing 7 [
(Change) to switch on/off
Set the validity period that the message is stored at the
Message centre.
[192] to scroll to 1 hour, 12 hours, 1 day, 1 week or
Maximum 7 [5] (Select)
Choose whether or not you want to receive a confirmation
that your message has been delivered.
[5] (Select) to switch on/off
Decide whether or not you want to send your message via
GPRS.
[5] (Select) to switch on/off
Messages
5
]
37