NordicTrack COMMERCIAL 14.0 User Manual page 13

16. Slide the Lower Upright Cover (80) upward, and
attach it to the Upright (4) with two M4 x 16mm
Screws (104).
17. Attach the Accessory Tray Base (8) to the
Upright (4) with two M4 x 16mm Screws (104).
18. See the left drawing. Locate the receiver in
the Accessory Tray Base (8). Insert the wire on
the receiver into the indicated hole in the Lower
Upright Cover (80).
See the right drawing. Locate the Receiver
Wire Harness (146), which is attached to the
Upright (4) with wire ties. Connect the Receiver
Wire Harness to the wire on the receiver.
16
80
104
17
8
104
18
Hole
80
Wire
Receiver
8
13
4
4
Top View
Wire
4
146