NordicTrack COMMERCIAL 14.0 User Manual page 11

12. Tip: Avoid pinching the wires in the Right and
Left Handlebars (83, 87).
Attach the Right Handlebar (83) to the right side
of the Console Bracket (62) with three M8 x
16mm Screws (72).
Repeat this step with the Left Handlebar (87).
Then, remove the packaging from the wires on
the Right and Left Handlebars (83, 87).
13. Slide the Right Upper Body Arm (61) onto the
Right Upper Body Leg (36).
Attach the Right Upper Body Arm (61) with two
M8 x 35mm Bolts (96) and two M8 Jam Nuts
(94). Make sure that the Jam Nuts are in the
hexagonal holes in the Right Upper Body
Arm.
Attach the Left Upper Body Arm (47) in the
same way.
12
87
Avoid pinching
the wires
13
47
Hexagonal Holes
11
62
83
72
61
96
36
94