Test Operation - Panasonic CS-20KM1HPK Installation Manual

(3) How to select FORCED OFF and ON/OFF OPERATION
• Turn the power on and then use the remote controller
to selet operation.
• Set the remote controller to the field set mode. For
details, refer to the "HOW TO SET IN THE FIELD", in
the remote controller manual.
• When in the field set mode, select mode No. 12, then set
the first code (switch) No. to "1". Then set second code
(position) No. to "01" for FORCED OFF and "02" for ON/
OFF OPERATION. (FORCED OFF at factory set)
9-5 CENTRALIZED CONTROL
• For centralized control, it is necessary to designate the group No. For details, refer to the manual of each
optional controllers for centralized control.

10. TEST OPERATION

Refer to the installation manual of the outdoor unit.
• The operation lamp of the remote controller will flash when an error occurs. Check the error code on the liq-
uid crystal display to identify the point of trouble. An explanation of error codes and the corresponding trou-
ble is provided in "CAUTION FOR SERVICING" of the indoor unit.
English
SECOND CODE NO.
SETTING
FIRST CODE NO.
Mode No.
FIELD SET MODE
14