Quick Setup; Method One: Via The Wps Button; Method Two: Via A Web Browser - TP-Link TL-WA860RE User Manual

Chapter 2
2. 1.

Quick Setup

Power on
Plug the extender into an electrical outlet
LED changes to solid on.
Connect to the host network
There are two ways to connect to the host network: via the WPS button or via a web
browser. Using the WPS button is an easier way to extend your host network. We
recommend you to use this way if your router has a WPS button. The button might look
like one of these:
2. 1. 1.

Method One: Via the WPS button

1. Press the WPS button on your host router, and then press the WPS button on the
extender within 2 minutes.
Tips:
• Some ISP gateways disable the WPS function by default. If the WPS connection fails, please refer to
Two: Via a web browser.
• For more information about using WPS button on your host router, please refer to the router manufacturer's
user guide.
2. Wait until the WPS LED changes from blinking to a solid status, which indicates
that the WPS connection is successful. If not, please refer to
browser.
3. Enjoy! Connect to the extended network and enjoy the Internet. The extended
network shares the same SSID (network name) and password as those of your host
network.
Tips:
Since the performance of the extended networks will be affected by the distance between extender and host
router, we highly recommend you to relocate your extender referring to
2. 1. 2.

Method Two: Via a web browser

1. Connect your computer to the extender's wireless network.
| | .
WPS
near your host router, and then wait until the
Position Your
Set Up Internet Connection
Method
Method Two: Via a web
extender.
7