Table of Contents
Advertisement
7.9.5
Text-In screen
Siemens AG
NOTE
For the Notify action, the notify item you select should be enabled in the Notification setup screen
and the DVR should be registered in the RAS (Remote Administration System).
8.
Highlight the desired box under the PTZ heading, and press the
Î
A list of PTZ presets appear.
9.
Select the preset position for each PTZ camera, where you want PTZ cameras
to move to when the DVR detects video blind on the selected camera's input.
Î
You can save your Video Blind changes by highlighting Save and pressing the
button.
Î
Selecting Cancel exits the screen without saving the changes.
Highlight Text-In in the Event menu and press the
Î
The Text-In setup screen appears.
Fig. 41
Text-In Settings screen
Settings
The DVR can be set to react to text input from devices such as ATMs (Automated
Teller Machines) and POS (Point of Sale; i.e., cash registers). This screen allows
you to configure the DVR for each text-in device.
1.
Highlight the box under the Setup heading, and press the
Î
Selecting the Setup heading changes all the parameters excluding Port
settings of all the text input channels.
NOTE
The system performance might be affected when a large quantity of text inputs are detected from
several channels at the same time.
Configuration
button.
button.
button.
47
06.2010
Hide quick links:
Advertisement
Table of Contents
