Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual page 21

Table of Contents

Advertisement

Siemens AG
NOTE
When set to High or Very High resolution, the maximum recording speed of each camera channel
decreases by half. However the maximum recording speed of 25 ips (30 ips for NTSC) will maintain if
the number of cameras that are turned On is two or less.
No. of cameras set to On and High or Very High resolution
0
1
25 ips
NOTE
The DVR will NOT record audio when the record speed is set to less than 1 ips.
2.
Highlight the Event Record Dwell box and set the length of time you would like
to record for the associated event.
Î
You can set the dwell from 5 seconds to 15 minutes.
Refer to the System Event - Actions screen in Section 7.9.6 for information
regarding event recording.
3.
Highlight the slide bar beside Auto Deletion, and use the Left and Right arrow
buttons to adjust the length of time recorded data will be kept from 1 to 99 days.
Î
The DVR automatically deletes video recorded earlier than the user-defined
period under three conditions: at midnight, whenever the system reboots or
whenever the user changes the Auto Deletion settings. Selecting "Never" will
disable the Auto Deletion function.
4.
Highlight the Panic Record tab.
Î
The Panic Record setup screen appears.
Fig. 9
Record setup screen
Highlighting Use Panic Recording and pressing the
and Off.
1.
Highlight the Panic Recording – Duration box and set the duration of panic
recording.
2
3
25 ips
12.5 ips
Configuration
4
12.5 ips
button toggles between On
06.2010
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents