Alarm Reset; Panic; Data Source; Exit - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

8.7.5

Alarm Reset

8.7.6

Panic

8.7.7

Data Source

8.7.8

Exit

Siemens AG
Selecting (Alarm Reset) in the Search menu resets the DVR's outputs including the
internal buzzer during an alarm. It is the same as pressing any button on the front panel
when the alarm is activated.
Selecting (Panic) in the Search Menu starts panic recording of all cameras, and
selecting again stops panic recording. It is the same as pressing the Panic button on
the front panel.
Selecting (Data Source) in the Search Menu allows you to select the data source to be
searched. Selecting Record searches the recorded data on the primary storage installed
in the DVR, and selecting Other searches recorded data used for another DVR then
installed in this DVR.
Selecting (Exit) in the Search Menu exits the search mode and enters the live
monitoring mode.
Operation
101
06.2010